2000 Bayliner 3055 Ciera – Bimini Top Set
I used about 10 hours to install the canvas. Used long time to be sure the holes where made the right places.
Started out with the windshield and then the center of the roof/ targa after the center was fastened/attached.
I stretched out and fitted the corners.
Then I fastend the rods too make the canvas even tighter before taking the side curtaine.
The side curtains zippered on and stretched and fitted the three corners so I can see the window flats out.
Then the four pieces on the back. Started with the door since this are critical to fit.
Fastened all the push buttons on the targa then stretched as hard I can to fasten the lower one.
To plase the holes for the buttons i used an awl to make a smale hole, and other places I used an pencil to mark the hole.
When fitting the canvas it needs time to stretch because of the folds off the transport packing.
I used som tape to fasten the tool to the visegrip or else it can bounce of the vise grip plier.
I’m very happy with my new boat canvas enclosure.
Have an warm summer.
Lars, Sellebakk, Norway
2000 Bayliner 3055 Ciera
Bimini Top Set with bimini top, front curtain, side curtains and back curtain.
Color – Sunbrella Black